Scale 1/96 Length 901mm Beam 89mm Sailing weight 1.25kgs

The models are based on the period after the original ships' sea trials, when a number of modifications were carried out. To this end all ships were changed – up gunned to 2 x 4inch guns forward funnels lengthened so that fumes cleared the bridge, turtle decks removed to a standard fo/castle. This gave the ships the classic destroyer outline. The base of these models is a one piece vacuformed or moulded fibreglass hull with all superstructures and decks in 1mm plastic, for one glue construction.
These models are designed with the beginner in mind and as a good starter to the world of warship modelling. They embody all the excitement of the building and driving of a warship without the task of constructing a full fleet model. The simple structure on the decks of these ships makes for very quick construction and with all funnels and boats in vacuformings, allied with a full set of fittings in cast light alloy and cast plastic makes for an attractive model.
As the choice of motor and couplings is very important in the construction of these ships they can be supplied with the kit on request.
THIS MODEL IS BASED ON A PLATED GLASS FIBRE HULL
THE KIT IS IN SINGLE SCREW FORMAT AND RUNS ON 4 OR 5 1.2AH NICADS.

Scale 1/96  Length 958m Beam 114mm Sailing weight 3.1kgs

One of the oldest production kits in the Deans Marine range, Now brought up to date to the standard of the latest kits
The fibreglass hull in this is with full plating and port detail. Computer generated colour coded printed plastic forms the main superstructure along with the 1mm plastic deck. To complete the construction of the model all complex parts are vacuformed in 1mm plastic for funnel, boats, turrets etc.
A complete set of fittings is included in the kit with all detail parts such as weapons, deck fittings, etc, cast in light alloy. Larger item such as lockers, floats, and gun bases are moulded as resin castings for light weight. The lattice mast, such a notable feature of this class of ship is assembled from etched brass in four parts for simple assembly. Ladders and stanchions are also in etched brass to give a final showcase finish. Propshafts in stainless steel are cased in brass proptubes with fitted oilers and replacable bearings along with rudder and tiller arm.
These, together with a comprehensive instruction book with digital printed pictures & instructions and a FULL SIZE PLAN assist in the assembly of this impressive model.

Scale 1/96 Length 762m Beam 120mm Sailing weight 2.21kgs

The model is based on a plated fibre glass hull. All decks and superstructure are in 1mm printed plastic sheet format with turret, funnel, boats etc in vacuformed plastic. Weapons and fine detail fittings are in cast in light alloy, and all larger items are cast in lightweight plastic. Stanchions and ladders for that extra fine detail are in etched brass. Propshafts and tubes are included in this kit along with the rudder and tiller arm. THE FULL SIZE PLAN is from the D McGregor range. With its twin screws and twin motors and short length/beam ratio this makes into one of the busiest little models in our range and she has all the outstanding handling qualities of her bigger and full size sister. The close range weapons fit on this model are 4 40mm bofors guns.

Scale 1/96 Length 1.3m Beam 178mm Sailing weight 4.3kgs

The model of Britannia is based on a fibreglass hull with bulwarks, portholes, proptube exits and bilge keels moulded into the hull.
The construction of the superstructure is from computer generated printed plastic in 1mm and .5m.
To finish the assembly vacuforms are provided for the funnel and all ships boats for those who wish to add lots of detail. Also included as an option are a complete set of the ships motor boat hulls with all detail moulded into the castings to give two options for the model.
To add the finishing touch, all fittings are included cast in light alloy or plastic.
Brass etchings are supplied for the Ships stanchions and ladders.
Proptubes fitted with oiling tubes and stainless steel shafts are included together with a comprehensive instruction book to aid assembly with sketches and pictures to assist in the construction. All part numbers are keyed to the full size plan included in the kit.
Full details are supplied for the fitting of motors, nicads, and radio equipment.

Scale 1/96 Length 1.2m Beam 127mm Sailing weight 4.4kgs

This model is constructed with a plated glass fibre hull, with all portholes and intakes moulded into the hull. To assist in the location of the running gear, the propshaft and rudder exits are marked on the hull. Decks and superstructure are in 1mm or .5mm plastic along with photo exploded views in the instructions to assist in construction. All details are added from the large range of cast alloy and cast plastic fittings included in the kit together with a full running gear set comprising stainless steel propshafts, hard brass proptubes with replaceable bearings, rudder and tiller. Stanchions and ladders are in etched brass to give that crisp finish. A full size plan keyed to a comprehensive instruction book assist in the construction of this classic model destroyer.

Scale 1/96 Length 1.02m Beam 107mm Sailing weight 2.82kgs

This model is based on a plated glass fibre hull, with the superstructure and decks in 1mm plastic. Vac-forms for the funnels, boats, etc, cast alloy main weapons and close range armament. To add the final crisp finish to the model, brass etchings are supplied for all stanchion, ladders etc. A full set of instructions, plus a FULL SIZE PLAN are included in this kit along with stainless steel propshafts, proptubes and rudder.

Scale 1/96 Length 1.65mm Beam 265mm Sailing weight 12.2kgs

The model illustrated shows the ship in her early years, with the original bridge layout The kit is based on the ship as in 1917 The hull is a one piece fiberglass moulding up to the deck line and including the raised focastle to ease construction. All plating and surface detail is moulded into the hull. The deck is 4mm marine plywood with the main deck and foredeck C.N.C. CUT. The deck planking is printed on .6mm marine plywood ready to lay, plus instrctions for laying individual planks for the modeller wishing to add his own touch. The main turrets are also fiberglass mouldings. The 12 inch gun barrels are Acrylic castings. Ships boats, funnells, D.C. towers etc are all vacformings, with optional extras available for precast ships boats as acrylic cast items. Almost all other fittings requiring detail and strength, such as the 12 pounder guns, hatches etc, are cast in light alloy.

Scale 1/96 Length 1.62m Beam 350mm Sailing weight 12.1kgs

Glass fibre detailed hull, Glass fibre detailed hull deck. 1mm Printed plastic details, Colour code printed superstructure. Vacformed details, liferafts, gun cabs etc, Motor mount, Pre-printed self adhesive deck planking, Full metal fittings set Cast resine fittings, Stainless steel Propshaft, propeller, 2 Full size full colour plans WITH EMBEDDED HI RESOLUTION COLOUR PHOTOS and full colour detailing of metal, plastic and resine parts. Digital instructions. Pre- cut waterproof vinyl Decals set.

A variation on the well known flower class hull. This was the original design of this famous little ship. All the details of the normal Flower class, including plating, port detail, and the quarter deck bulwarks are part of the moulding.

Scale 1/96 Length 649 mm Beam 103mm Depth 65mm

Scale 1/96 Length 1.15m Beam 114mm Sailing weight 3.3kgs

The plated glass fibre hull is the base for this kit. Deck support beams are from balsa and hardwood, main decks and super structure are in 1mm plastic for quick assembly and vac-formings for the funnel, boats and turrets etc. Brass etchings for all stanchions, ladders, are included in this kit along with a full set of fittings in vacast plastic and light cast alloy. To complete this model both propshafts in stainless steel, proptubes, rudder, ect are included along with recommendations for motors, nicads, and speed controllers.

Scale 1/72 Length 820mm Beam 160mm Sailing weight 5kg

The fiberglass hull in this kit is with full plating and port detail. Computer generated printed plastic forms the main superstructure along with the 1mm plastic deck. To complete the construction of the model all complex parts are vacformed in 1mm plastic for funnel, boats, turret etc. A complete set of fittings are included in the kit with all detail parts such as weapons, deck fittings, etc, cast in light alloy. Larger item such as lockers, floats, and gun bases are moulded in plastic castings for light weight. Ladders and stanchions are also in etched brass to give a final showcase finish. Propshaft in stainless steel are cased in a brass proptube with fitted an oiler and replaceable bearing along with rudder and tiller arm. These, together with a comprehensive instruction book and a full size plan assist in the assembly of this impressive model. A colour chart and a set of precut decals for the pennant numbers are included in the kit to add the finishing touch to this most attractive addition to our warship range.

Scale 1/96 Length 1.346m Beam 266mm Sailing weight 12kg

One of the most complicated and detailed model in the Deans fleet, and truly the PRIDE OF THE FLEET. Some of the major features of this model are the one piece fibreglass hull with all plating detail and armour belt, plus all casemates, hatches portholes, anchor bedplates, and the massive ram bow all moulded into the hull; one piece fibreglass moulded superstructure with deck planking and gun port detail engraved into the moulding. Full size plan in 2 parts with photo exploded instruction book to ease assembly of this massive model. A large sheet of brass etchings with over 300 items, adds the final super-detail to the majestic model. Over 400 cast metal fittings & 100 plus cast plastic items add the detail to this model, decks from marine ply, and 62 vacformings for boats, turrets etc.

Scale 1/96 Length 977m Beam 95mm Sailing weight 2.4kgs

A lightweight glassfibre hull is the base for this model and to ease construction the break of the fo/castle is a separate moulding. Decks and all superstructure are constructed from printed plastic sheets, and to finish the model a complete set of fittings in cast light alloy and cast plastic are included. The complicated lattice mast is an alloy casting, all stanchions, ladders etc are in brass etched format. Comprehensive instructions and a full size plan are included to ease assembly.

Scale 1/96 Length 1.13m Beam 114mm Sailing weight 3.1kgs

This model of the famous ship is based on a full plated glass fiber hull with ports and intakes moulded in. The decks and superstructures are in 1mm & .5mm printed plastic sheet. Vacforms supply the hard parts such as gun shields, funnel and the ships boats etc with over 600 cast metal and plastic fittings assisting in making up the classic destroyer. As in all of the kits in our range it includes a FULL SIZE PLAN to complement the comprehensive instructions. Brass etchings are supplied to assemble the complicated lattice mast, stanchions, ladders etc. The colour scheme supplied is for the ship in her pacific fleet scheme with its blue panel on the ships hull.

Scale 1/96 Length 1.13m Beam 114mm Sailing weight 3.1kgs

The model kit of this famous destroyer is based on a moulded glass fiber hull with full plating detail, ports, etc. As in most of the kits, superstructure and decks are in 1mm and .5mm plastic. To finish the model to the high detailed standard of all the Deans range, the main weapons, close range weapons and numerous small highly detailed fittings are cast in light alloy or vac-cast plastic. This is to save top weight and to give outstanding performance of this type of model on the water. This model is capable of being thrown around the lake at a scale speed in excess of 30 knots. To add the finishing touch and to give a near showcase model all complicated items such as gun turrets, funnel, boats etc are in vacformed plastic, brass etchings for stanchions, ladders etc giving a strong model to take the odd knocks and bumps.

Scale 1/96 Length 910mm Beam 150mm Sailing weight 2.0kgs

The fibreglass hull in this kit is with full rubbing strip and port detail. Computer generated printed plastic forms the main tank deck and basic superstucture along with the 1mm plastic deck. To complete the construction of the model all complex parts are vacformed in 1mm plastic for bridge, boat, motor mounting and nicads tray etc. A complete set of fittings are included in the kit with all detail parts such as weapons, deck fittings, etc, cast in light alloy. Larger item such as lockers, floats, and gun bases are moulded in plastic castings for light weight. Ladders and stanchions are also in etched brass to give a final showcase finish. Propshafts in stainless steel are cased in brass proptubes with fitted oilers and replaceable bearings along with rudders and tiller arms. These, together with a comprehensive instruction book and a full size plan assist in the assembly of this impressive model. A colour chart, plus a set of decals, are included in the kit to add the finishing touch to this kit model as a worthy and much requested addition to our warship range.

Scale 1/96 Length 985mm Beam 122mm Sailing weight 3.02

The fibreglass hull in this kit is with full plating and port detail. Computer generated printed plastic forms the main superstructure along with the 1mm plastic deck. To complete the construction of the model all complex parts are vacformed in 1mm plastic for funnel, boats, turret etc. A complete set of fittings are included in the kit with all detail parts such as weapons, deck fittings, etc, cast in light alloy. Larger item such as lockers, floats, and gun bases are moulded in plastic castings for light weight. The lattice mast, such a notable feature of this class of ship is assembled from etched brass in four parts for simple assembly. Ladders and stanchions are also in etched brass to give a final showcase finish. Propshafts in stainless steel are cased in brass proptubes with fitted oilers and replaceable bearings along with rudder and tiller arm. These, together with a comprehensive instruction book and a FULL SIZE PLAN assist in the assembly of this impressive model. A colour chart and a set of precut decals for the pennant number are included in the kit to add the finishing touch to this most attractive addition to our warship range.

Scale 1/96 Length 1.65m Beam 265mm Sailing weight 12.2kgs

The most complicated and detailed model in the Deans fleet and truly the PRIDE OF THE FLEET. Some of the major features of this model are the one piece fiberglass hull with all plating detail and armour belt, plus all casemates, hatches portholes, anchor bedplates, and the massive ram bow all moulded into the hull; one piece fiberglass moulded superstructure with deck planking and gun port detail engraved into the moulding. Full size plan in 2 parts with photo exploded instruction book to ease assembly of this massive model. Over 400 cast metal fittings & 100 plus cast plastic items add the detail to this model, decks from marine ply and 1mm plastic, and 62 vac-formings for boats, turrets etc.

Scale 1/96 Length 1.34m Beam 150mm Sailing weight 5kgs

The fiberglass hull in this kit is with full plating and port detail. The large stern mine laying doors and all outlets are moulded into this hull. Computer generated printed plastic forms the main superstructure along with the 1mm plastic deck. To complete the construction of the model all complex parts are vacformed in 1mm plastic for funnel, boats, turrets etc. A complete set of fittings are included in the kit with all detail parts such as weapons, deck fittings, etc, cast in light alloy. Larger item such as lockers, floats, and gun bases are moulded in plastic castings for light weight. The two large mine loading cranes, such a notable feature of this class of ship are assembled from etched brass in 9 parts for simple assembly. Ladders and stanchions are also in etched brass to give a final showcase finish. Propshafts in stainless steel are cased in brass proptubes with fitted oilers and replaceable bearings along with rudder and tiller arm. These, together with a comprehensive instruction book and a full size plan assist in the assembly of this impressive model. A colour chart and a set of decals for signal flags are included in the kit to add the finishing touch to this most powerful looking model as a worthy and much requested addition to our warship range.

Scale 1/96 Length 762m Beam 120mm Sailing weight 2.21kgs

The model is based on a plated fibre glass hull. All decks and superstructure are in 1mm printed plastic sheet format with turret, funnel, boats etc in vacformed plastic. Weapons and fine detail fittings are in cast in light alloy, and all larger items are cast in lightweight plastic. Stanchions and ladders for that extra fine detail are in etched brass. Propshafts and tubes are included in this kit along with the rudder and tiller arm. The full size plans included are from the D McGregor range. With its twin screws and twin motors and short length/beam ratio this makes into one of the busiest little models in our range and she has all the outstanding handling qualities of her bigger and full size sister. The close range weapons fit on this model are 4 40mm bofors guns. The kit contains a comprehensive set of instructions.

Scale 1/96 Length 901mm Beam 89mm Sailing weight 1.25kgs

The models are based on the period after the original ships' sea trials, when a number of modifications were carried out. To this end all ships were changed – up gunned to 2 x 4inch guns forward funnels lengthened so that fumes cleared the bridge, turtle decks removed to a standard fo/castle. This gave the ships the classic destroyer outline. The base of these models is a one piece vacformed or moulded fibreglass hull with all superstructures and decks in 1mm plastic, for one glue construction. These models are designed with the beginner in mind and as a good starter to the world of warship modelling. They embody all the excitement of the building and driving of a warship without the task of constructing a full fleet model. The simple structure on the decks of these ships makes for very quick construction and with all funnels and boats in vacformings, allied with a full set of fittings in cast light alloy and cast plastic makes for an attractive model.
These ships have all the performance of their bigger sisters and have one of the most outstanding sea keeping qualities of all the models in the range. As the choice of motor and couplings is very important in the construction of these ships they can be supplied with the kit on request.
THE KIT IS IN SINGLE SCREW FORMAT AND RUNS ON 4 OR 5 1,2AH NICADS.

Scale 1/96 Length 985mm Beam 122mm Sailing weight 3.02kgs

The fiberglass hull in this kit is with full plating and port detail. Computer generated printed plastic forms the main superstructure along with the 1mm plastic deck. To complete the construction of the model all complex parts are vacformed in 1mm plastic for funnel, boats, turret etc. A complete set of fittings are included in the kit with all detail parts such as weapons, deck fittings, etc, cast in light alloy. Larger item such as lockers, floats, and gun bases are moulded in plastic castings for light weight. The lattice mast, such a notable feature of this class of ship is assembled from etched brass in four parts for simple assembly. Ladders and stanchions are also in etched brass to give a final showcase finish. Propshafts in stainless steel are cased in brass proptubes with fitted oilers and replaceable bearings along with rudder and tiller arm. These, together with a comprehensive instruction book and a full size plan assist in the assembly of this impressive model. A colour chart and a set of precut decals for the pennant number are included in the kit to add the finishing touch to this most attractive addition to our warship range.

Scale 1/96 Length 1.1m Beam 141mm Sailing weight 4.5kgs

This was the first kit in the range to have MOD 11.This was the decision by Deans Marine to scrap all of the kits in the range that are left behind in the development process. The model is then remade as a totally new kit based on a new hull and fittings that bring it up to the standards of the later kits in the range that have had the advantage of the latest construction methods. As in all of our products lots of brass etchings are included for stanchions, ladders The enormous lattice mast and the bedstead radar that was such a notable feature of these ships. The brass etching makes this a simple construction job. The Mod 11 programme will be carried out on all kits in the range throughout the life of the model. Although this is a large model for a frigate she sails and steers well, being capable of almost "on the spot" turns.

Scale 1/96 Length 1.14m Beam 140mm Sailing weight 4.5kgs

The plated fibreglass hull is the base for this model, along with the superstructure from computer printed 1mm plastic for the main assembly and a sheet of .5mm printed plastic adding the final sharpness to this elegant model. To add all the detail over 450 fittings cast in light alloy or plastic are included in the kit. Vacformed plastic mouldings take care of all the larger and more complex parts such as the many ships boats, funnels, vents and funnel bases. The many stanchions on this model are cast in light alloy to give the correct pattern of spacing, with 2 gauges of brass wire for the stanchion wires. Brass etched ladders add the finest detail and delicate touch to this model, one of the classics amongst warships. Although a large model by small ship standards the handling and sea-keeping qualities are outstanding. A comprehensive instruction book is included in the kit keyed to a full size plan and large format exploded view. As in all the kits in the range, a full set of running gear is included in the kit. To add to the classic look of the ships of this era 2 colour schemes are included in the instructions. The black hulled victorian livery gives a great presence and for an alternative scheme the colour of China station are included along with the standard Atlantic fleet grey. Tips are also in the instructions for the use of the modern ACRYLIC car spray paints that are giving such outstanding results

Scale 1/96 Length 1.14m Beam 140mm Sailing weight 4.5kgs

The plated fibreglass hull is the base for this model along with the superstructure from computer printed 1mm plastic for the main assembly. A sheet of .5mm printed plastic adds the final sharpness to this elegant model. To complete the detail over 450 light alloy and cast plastic fittings are included. Vacformed plastic mouldings take care of all the larger and more complex parts such as the many ships boats, funnels, vents and funnel bases. The many stanchions on this model are cast in light alloy to give the correct pattern of spacing, with 2 gauges of brass wire for the stanchion wires. Brass ladders add the finest detail and delicate touch to this model, one of the classics amongst warships Although a large model by small ship standards the handling and sea-keeping qualities are outstanding. A comprehensive instruction book is included in the kit keyed to a FULL SIZE PLAN and large format exploded view. As in all the kits in the range, a full set of running gear is included. To add to the classic look of the ships of this era 2 colour schemes are included in the instructions. Black hulled Victorian livery gives a great presence and for an alternative scheme the China station livery is included, along with the standard Atlantic fleet grey. Tips are also given in the instructions for the use of the modern ACRYLIC car spray paints that are giving such outstanding results.

Scale 1/96 Length 1.21m Beam 152mm Sailing weight 4.1

The model of H.M.S SOLEBAY is constructed on a fully plated glassfibre hull with ports, asdic and intakes moulded in, all to the official admiralty drawings. The decks and superstructure are in 1 & .5mm computer generated printed plastic. Ships boats (with options) the funnel and the staag mounting shields are supplied as vacformings. For the first time the main armament and director are resin mouldings resulting in extremely sharp and accurate fittings. Cast metal, etched brass mast ,stanchions, and resin fittings add the truly professional touch to this classic destroyer model. Propellor tubes, fitted with oiling points and stainless steel shafts are included together with a comprehensive instruction book and a full size plan. Full details are supplied for the fitting of motors, nicads and radio equipment.

Scale 1/96 Length 889mm Beam 101mm Sailing weight 2.1kgs

A plated fibreglass hull forms the base for this model of these "Pert" little ships. Decks and superstructure are in 1mm printed plastic sheet with .5mm sheet for the 2 main structures. To complete this detailed little ship over 150 cast metal and cast plastic items along with vacforming for all gun shield, gun cabs, ship boats are provided. Etched brass for the stanchions give the finishing touch to the dainty appearance of this ship. As in all the kits it is complete with all running hardware ie; proptubes, propshafts in stainless steel, rudder, tiller arm etc.

Scale 1/96 Length 1.03m Beam 95mm Sailing weight 2.4kgs

This model captures the attractive and dainty looks of this class of ships. The plated fibreglass hull with its slender lines gives a good start to the model. All deck and superstructure parts are in printed 1mm & .5mm plastic sheet, with vac-formings used for the boats, funnels, gun shields and in the mounts of the triple t/tubes carried in this class of ship. To complement the kit over 400 fittings in cast light alloy and cast plastic give the clutter and detail to enable a working model of showcase standard to be produced.

Scale 1/96 Length 1.15m Beam 114mm Sailing weight 3.3kgs

The plated glassfibre hull is the basis for this model of one of the fastest destroyers of W.W.11. The superstructures and decks are in 1mm plastic to give the crisp finish so noticeable on this type of ship. Funnels, ships boats, gun shield are in vacformed plastic for quick construction. To add the glasscase detail to the model further fittings are included in cast light alloy and plastic, together with propshafts and propellers. A full set of instructions and s full size plan assist in the construction of this most elegant model which has earned the nickname the 40 knot "razor blade".

Scale 1/96 Length 1.1m Beam 141mm Sailing weight 4.5kgs

This was the first kit in the range to have MOD 11. As in all of our products lots of brass etchings are included for stanchions, ladders. The enormous lattice mast and the bedstead radar that was such a notable feature of these ships. The brass etching makes this a simple construction job. The Mod 11 programme will be carried out on all kits in the range throughout the life of the model. Although this is a large model for a frigate she sails and steers well, being capable of almost "on the spot" turns.

Scale 1/96 Length 1.16m Beam 133mm Sailing weight 3.7kgs

This kit contains a one piece glass fibre hull, all decks and superstructure in 1mm printed plastic sheet, along with photographic exploded views of construction notes.

To finish off the model to a very high standard and to add the noticable "clutter" of the ship over 200 fittings cast in light alloy and light weight plastic are provided. This gives a highly detailed model. All other fittings as per the kits in our range.

Scale 1/96 Length 1.15m Beam 114mm Sailing weight 3.3kgs

The model is based on the kit of the Grenville from our range, but with the plans and fittings modified to fit this famous Dutch warship. As with all the models in the range, the hull is based on a light weight glass fibre hull with a plated finish. Weapons and small detailed fittings are cast in light alloy, larger items such as lockers, carley floats etc, are cast in vacast plastic for light weight to assist in giving the model its outstanding performance on the water. To add the finishing touches, etched brass is used for ladders, dial sights and stanchions. Custom made prop shafts and tubes are included along with the rudder, tiller, to make this a complete kit with its full size plan and comprehensive instructions

Scale 1/96 Length 1.32mm Beam 127mm Sailing weight 3.9kgs

This addition to the DEANS range of models is probably the most requested kit ever made, a magnificent partner to the growing range of British ships. Considered by many to be one of the finest and most elegant warships ever to grace the seas, this model captures the fine lines and superb sea keeping qualities of the prototype. As in all the kits in the range, a full size plan together with propshafts in stainless steel, proptubes in hard brass with replaceable bearings, rudder and tiller are included in this comprehensive kit.

Scale 1/96 Length 1.14m Beam 140mm Sailing weight 4.3kgs

The plated fibreglass hull is the base for this model, along with the superstructure from computer printed 1mm plastic for the main assembly and a sheet of .5mm printed plastic adding the final sharpness to this elegant model.

To add all the detail over 100 fittings cast in light alloy or plastic are included in the kit. Vacformed plastic mouldings take care of all the larger and more complex parts such as the many ships boats, funnels, vents and funnel bases.

The many stanchions on this model are cast in light alloy to give the correct pattern of spacing, with 2 gauges of brass wire for the stanchion wires. Brass etched ladders add the finest detail and delicate touch to this model, one of the classics amongst warships.

A comprehensive instruction book is included in the kit keyed to TWO FULL SIZE PLANS.

As in all the kits in the range, a full set of running gear is included in the kit. To add to the classic look of this ship the colour scheme east India station is included along with tips in the instructions for the use of the modern ACRYLIC car spray paints that are giving such outstanding results.

Scale 1/24 Length 812mm Beam 215mm Sailing weight 1.8kg

The 2 models in this range of craft are based on a lightweight glass fibre hull capturing the racy lines of the prototype. The deck is of 1/8" resin bonded marine plywood fitted to the top of the rubbing strip which is moulded into the hull for easy construction.

The complete superstructure moulding, along with the carly float, battery box, are all in vacformed plastic to speed construction. The gun turrets are formed in clear acrylic along with a full set of weapons and fittings to complement the full size plan and instructions.

Scale 1/24 Length 920mm Beam 270mm Sailing weight 2.9kg

The hull of this model is moulded in lightweight glassfibre, with a moulded in rubbing strip that forms a seating for the 1MM PLASTIC deck. The complete superstructure and all deck structure parts are in preprinted 1mm colour plastic.

To complement this most attractive model a full set of fittings in cast metal and resin is included along with propeller shaft, tube and rudder. To assist in the construction a full size plan is provided along with a complete set of comprehensive instructions, plus a set of decals to give a colourful finished model.

Scale 1/24 Length 610mm Beam 180mm Sailing weight 2kgs

The kit is based on a detailed glassfibre hull with rubbing strip, fender strip, proptube and rudder exits, moulded into the hull. The Deck is from 1mm printed plastic. Vac-fomings supply the nicads battery tray, rudder servo mount and motor mounting for the internals. Vacformings in clear styrolux form the forward and aft cabin assembly. Printed plastic supplies the construction for the aft cockpit. A new system for clear windows has been developed for this model consisting of computer cut masking film which is fitted onto the clear mouldings, the cabin is then primed and painted and the film removed. Computer cut "aluminum" frames fitted onto the clear plastic for windscreens etc, cabin windows, skylights etc. Cut window frames are then applied over the edge of the clear parts. This removes one of the jobs that modelers tell us they dislike, that of cutting our complicated windows from mouldings, all similar sizes, with complex corners. A full set of fittings in cast alloy and resin is included in the kit , along with propshaft,proellor, rudder, and tillers arm, plus decals for that finishing touch to this colourful model. To aid construction, a comprehensive instruction book and full size plan is included.

Scale 1/24 Length 1.46m Beam 2580mm Sailing weight 5.4kgs

Our Representation Model MTB605 in November 1944, armed with one 6-pounder gun on a Mark VII mounting, two twin .5-in machine guns on Mark V [power] mountings, two twin .303-in Vickers machine-guns (not shown), one twin 20-mm Oerlikon on a Mark IX mounting, one 6-pounder gun on a Mark VI mounting, two 18-in torpedo tubes, two depth charges, a single 2-in rocket flare launcher and provision for mines. Glass fibre detailed hull, 1.5mm Plastic deck and superstructure, 1mm Printed plastic details, Colour code printed superstructure, Vacformed details, liferafts, gun cabs etc, Moulded motor mounts, Pre-printed deck paneling, Full metal fittings set, Cast resine fittings Stainless steel Propshafts, propellers, & skegs Full size full colour plan embedded high resolution colour photos and full colour detailing of metal, plastic and resine parts, Digital instructions, Pre- cut waterproof vinyl Decals set

Scale 1/24 Length 780mm Beam 230mm Sailing weight 1.6kgs

Glass fibre detailed hull, Light weight glass fibre deck, Moulded clear Styrolux Cabin, Moulded clear canopy, Vacformed Boston whaler kit, Moulded motor mounts, Moulded deck recess, Pre-printed deck paneling, Vinyl cut vinyl “wood” panels, Vinyl cut “Aluminium” window frame, Pre cut masking films, Full metal fittings set, Cast resine fittings, Propshafts, propellers, & skegs, Full size plan, Digital instructions, Decals set.

Scale 1/24 Length 825mm Beam 203mm Sailing weight 3.8kgs

The kit is based on a detailed glassfibre hull with rubbing strip, bulwark scrollwork, proptube and rudder exits, moulded into the hull. The Deck is from printed plywood with lining for engraved planking. Vacformings in styrene form the complete cabin assembly and ships boat. Printed plastic supplies the construction for the wheelhouse cockpit. A full set of fittings is included in the kit with propshafts, rudders, prop and tillers arms, plus decals and details to complete the wheelhouse To aid construction a comprehensive instruction book and full size plan is included. Printed plastic supplies the construction for the wheelhouse cockpit. A full set of fittings is included in the kit with propshatfs, rudders, prop and tillers arms, plus decals and details to complete the wheelhouse interior

The model is in the well known scale of 1/24 which gives great scope for detail and an easy to construct kit range of craft, based on a light weight glass fibre hull capturing the racy lines of the prototype. The deck is of 1/8" resin bonded marine plywood fitted to the top of the rubbing strip which is moulded into the hull for easy construction. The complete superstructure is constructed from 1mm & .5mm printed plastic, Vacformed plastic mouldings, for the carly float, gun base ring, and battery box, to speed construction. The kit is complete with running gear and along with a full set of weapons and fittings to complement the full size plan and instructions.

Scale 1/24 Length 750mm Beam 178mm Sailing weight 2kgs

The kit is based on a detailed glassfibre hull with rubbing strip, bulwark scrollwork, proptube and rudder exits, moulded into the hull. The Deck is from printed plastic with a self adhesive 1mm Maple veneer for planking. Vac-formings in clear styrolux form the complete cabin assembly and ships boat. Printed plastic supplies the construction for the wheelhouse cockpit. A new system for clear windows has been developed for this model consisting of computer cut "wood" fitted with cut "aluminum" frames fitted onto the clear plastic for windscreens etc, cabin windows, skylights etc have computer cut masking film which is fitted onto the clear mouldings, the cabin is then painted and the film removed. Cut window frames are then applied over the edge of the clear parts. A full set of fittings is included in the kit with propshatfs, rudders, prop and tillers arms, plus decals and details to complete the wheelhouse interior, we even supply the carpets. To aid construction a comprehensive instruction book and full size plan is included.

Scale 1/24 Length 812mm Beam 215mm Sailing weight 1.8kg

The 2 models in this range of craft are based on a lightweight glass fibre hull capturing the racy lines of the prototype. The deck is of 1/8" resin bonded marine plywood fitted to the top of the rubbing strip which is moulded into the hull for easy construction. The complete superstructure moulding, along with the carly float, battery box, are all in vacformed plastic to speed construction. The gun turrets are formed in clear acrylic along with a full set of weapons and fittings to complement the full size plan and instructions.

Scale 1/15 Length 965mm Beam 139mm Sailing weight 2.2kgs

This kit is based on a glass fibre hull with rubbing strip and gingerbread detail moulded into the surface of the hull.

The construction of the deck and superstructure is in marine grade plywood, The deck planking is supplied cut to width in Mahogeny and Obeche, A full set of fittings in cast alloy is included in the kit, along with a full size plan and a comprehesive set of instructions.

Scale 1/35 Length 762mm Beam 120mm Sailing weight 2kgs

This kit is based on a glass fibre hull with rubbing strip and gingerbread detail moulded into the surface of the hull. As is the glass fibre moulded superstructure.

The construction of the deck and is in marine grade plywood, The deck planking is supplied cut to width in Mahogeny and Obeche, A full set of fittings in cast alloy is included in the kit, along with a full size plan and a comprehensive set of instructions.

Scale 1/24 Length 711mm Beam 152mm Sailing weight 2kgs

The kit is based on a glass fibre hull, deck is in printed colour coded 1mm plastic as is the main cabin. The main cabin roof. funnel, and engine casing is vacformed plastic.

A complete set of fittings in metal and plastic is supplied in the kit along with propshaft,prop etc.

The deck planking is preprinted on cast self adhesive vinyl to ease construction

Ideal for starting into the joys of towing, and great fun having something to push, pull and generally shove around the lake.

Theses two kits in one box make up a pair of barges are based on a VACFORMED hulls for fast and simple assembly.

Computer generated plastic printed in 6 colours is used for the deck and wells to give quick and crisp assembly.

A full set of fittings in cast light alloy and plastic give the finishing touch to the models A crane base is included for fitting you own type of crane or lifting gear from one of the many model railway accessories on the market. Or do your own thing and design your own. A set of small scale plans are included in the kits of the equipment carried on full size barges.

Ideal for starting into the joys of towing, and great fun having something to push, pull and generally shove around the lake. These barges are based on VACFORMED hulls for fast and simple assembly. Computer generated plastic printed in 6 colours is used for the deck and wells to give quick and crisp assembly. A full set of fittings in cast light alloy and plastic give the finishing touch to the models A crane base is included for fitting you own type of crane or lifting gear from one of the many model railway accessories on the market. Or do your own thing and design your own. A set of small scale plans are included in the kits of the equipment carried on full size barges.

Scale 1/96 Length 403mm Beam 69mm Sailing weight 550g

Scale 1/96 Length 605mm Beam 125mm Sailing weight 1.3kg

Scale 1/96 Length 465mm Beam 86mm Sailing weight 736g

Scale 1/96 Length 619mm Beam 102mm Sailing weight 1.06kg

Scale 1/96 Length 560mm Beam 95mm Sailing weight 1.6kg

Scale 1/96 Length 619mm Beam 102mm Sailing weight 1.06kg

Scale 1/72 Length 269mm Beam 70mm Sailing weight 459g

Scale 1/72 Length 320mm Beam 115mm Sailing weight 857g

The color scheme shown on this model is fictional as the variations and colors used in the full size craft are to numerous to mention.